JUKI SC-956, Instruction Manual

Page: 105 / 185

– 100 –
3) Tilt the machine head. Detach pipe holder .
Draw out lubricating tube from oil tank .
Remove dust from around oil filter .
Oil remaining in the oil tank may leak
after drawing out the lubricating tube.
4) While leaving the machine head tilted, dis-
charge the oil remaining in the oil pan into oil
bottle
. At this time, remove thread waste
and dust from the relevant parts.
* Periodically discharge the oil from oil bottle .
(As a guide, approximately once a week)
Before tilting or raising the machine
head, be sure to check that there is no
pointed objects such as a screwdriver.
1. If the oil in the oil bottle is not dis -
carded for a long time, the oil bottle
is filled with oil and eventually
overflows from air vent
in the oil
remover, resulting in leakage of oil.
2. Clean the oil pan to remove the oil
and dust remaining in it approxi -
mately once a month.