JUKI SC-956, Instruction Manual

Page: 66 / 185

– 61 –
(2) Setting items for the polygonal-shape stitching steps
Data No. Item name
Unit of
change
Input range
Step 01
S201 Step changeover
Number of
stitches
One-touch
switch
Multi-layered
part
Separate-
ly-driven nee-
dle bar sensor
S203 Sensor value to change over the
step
1
― ―
1000 to 3000
―
S204 Number of stitches
(seam length in mm)
1stitch
1 to 2000
― ―
1 to 2000
S205 Stitch length
(the number of stitches per inch,
the number of stitches per 3 cm)
0.1mm
-4.0 to 4.0(LH-4578C-0B)
-7.0 to 7.0(LH-4578C-7, LH-4588C-7)
S206 Needle thread tension (left)
0 to 200
S207
Needle thread tension (right)
0 to 200
S209 Presser foot pressure
-20 to 200
S211 Needle bar stop position at the
time of pause
: Stop with the needle up
: Stop with the needle down
S212 Presser foot lifting during interme-
diate stop
: OFF : ON
S213 Presser foot lifting during interme-
diate stop
0.1mm
0.0 to 20.0
S214 Needle bar stop position at the
time of stop
: Stop with the needle up
: Stop with the needle down
: Thread trimming
: Continuity
S215 Stop and presser foot lifting
: OFF : ON