JUKI SC-956, Instruction Manual

Page: 80 / 185

– 75 –
<Count-completion screen>
5-3-4. How to reset the count-completion state
When the predetermined conditions are sat-
isfied during sewing, the count-completion
screen is displayed.
The counter is reset by pressing
❶ .
Then, the mode is returned to the sew-
ing mode. In this mode, the counter starts
counting again.
<Mode screen>
③ Confirming the data entered
Confirm the counter content. Then, press
❹ (or ❺ if ❹ is not
displayed) to return the screen to the mode
screen.
When close button
❻
is pressed on
the mode screen, the screen returns to the
sewing screen.
When the screen returns to the sewing
screen, the content of the counter you have
selected is displayed on customize button
❼ .
When customize button ❼ is
pressed, the counter current-value screen is
displayed.
<Sewing screen>
❶
❻
❼
<Current counter value screen>