JUKI SC-956, Instruction Manual

Page: 63 / 185

– 58 –
Data
No.
Item name
Unit of
change
Input range
S061 Reverse-feed stitch length correc-
tion value
0.1mm
-4.0 to 4.0(LH-4578C-0B)
-7.0 to 7.0(LH-4578C-7, LH-4588C-7)
S062 Sewing speed limit 10sti/min
150 to U096 ― ―
S063 Needle bar: Lower stop position 1deg
100 to 300 ― ―
S065 Presser foot lifting during interme-
diate stop
: OFF
: ON
― ―
S066 Presser foot lifting height during
intermediate stop
0.1mm
0.0 to 8.5 ― ―
S067 Presser foot lifting after thread
trimming
: OFF : ON ―
S068 Presser foot lifting height after
thread trimming
0.1mm
0.0 to 13.5 ―
S069 Automatic reset of both needles
after thread trimming
: OFF : ON
S070 Needle thread tension when the
needle bar stops at the midpoint of
angular stitching 0 to 200 ― ―
S071 Sewing speed limit for angular
stitching
10sti/min
150 to 1500 ― 150 to 1500
S072 Presser foot lifting at the midpoint
stop during angular stitching
: OFF
: ON
― ―
S073 Single side length correction of
angle 1
0.1mm
-5.0 to 5.0 ― ―
S074 Single side length correction of
angle 2
0.1mm
-5.0 to 5.0 ― ―
S075 Single side length correction of
angle 3
0.1mm
-5.0 to 5.0 ― ―
S076 Single side length correction of
angle 4
0.1mm
-5.0 to 5.0 ― ―
S077 Single side length correction of
angle 5
0.1mm
-5.0 to 5.0 ― ―