– 122 –
4) Place the multi-layered section of material under the presser foot, and press
.
The value of
❾
is automatically calculated, and that value becomes the "threshold" for the
multi-layered section detection. The value is adjustable with
according to the sewing
item.
If the "threshold" is decreased, the multi-layered section can be detected earlier. Be
aware that, excessively decreased threshold can cause a faulty detection.
Press
is pressed, the "multi-layered section changeover function ON sensor value screen"
is displayed.
<Multi-layered section changeover function ON
sensor value teaching screen>
Check that the "threshold" you have set
is entered. Then, press
again to
confirm the setting. Note that the "threshold"
can be directly entered or corrected on this
screen.
MAX : 3000
MIN : 1000
The initial value of "threshold"
for the multi-layered section
detection is a rough indication.
The threshold should be finely
adjusted according to the actual
sewing conditions such as the
item to be sewn.
<Multi-layered section changeover function ON sensor
value screen>
❾
Summary of Contents for SC-956
Page 1: ...INSTRUCTION MANUAL LH 4500C Series SC 956...
Page 180: ...175 11 GAUGE PARTS LIST 43 22 TABLE OF EXCHANGING GAUGE PARTS LH 4578C TYPE F LH 4578C F type...
Page 181: ...176 23 TABLE OF EXCHANGING GAUGE PARTS LH 4578C 7 LH 4578C 7...
Page 182: ...177 47 24 TABLE OF EXCHANGING GAUGE PARTS LH 4588C 7 LH 4588C 7...
