JUKI SC-956, Instruction Manual

Page: 36 / 185

– 31 –
Stitch length is displayed in section A on
the panel. (Example of display : 3.0 mm)
[How to adjust]
1) When ❶ is pressed, the stitch
length input screen is displayed.
2) Change the stitch length by pressing
numeric keypad ❷ .(Input unit: 0.1 mm)
3) Confirm your entry by pressing
❸ . Then, the sewing screen is dis-
played.
1. There may be the cases where the feed amount of the operation panel and the actual
sewing pitch are different from each other in case of the use in the state other than the
standard delivery or material used. Compensate the pitch in accordance with the sew -
ing product.
2. Be aware that interference between the throat plate and feed dog can occur depending
on the gauge used. Be sure to check the clearance in the gauge to be used. (The clear -
ance must be 0.5 mm or more.)
3. When you have changed the stitch length, feed dog height or feed timing, run the
sewing machine at a low speed to make sure that the gauge does not interfere with the
changed part.
4-5. Changing the sewing speed
The sewing speed is displayed in section A
on the panel. (Example of display : 3,000
sti/min)
[How to change]
1) Display the sewing speed entry screen
by pressing ❶ .
2) Change the sewing speed as desired
by pressing ten keys
❷
.
3) Confirm your entry by pressing
❸ . Then, the sewing screen is dis-
played.
4-4. Adjusting the stitch length
❶ A
❷ ❸
❶ A
❸ ❷