JUKI SC-956, Instruction Manual

Page: 142 / 185

– 137 –
<Teaching input screen (In the case the step changeover
basis is the detection of a multi-layered portion of material)>
<Sewing data edit screen>
When is pressed, the step is
changed over to the next one.
Confirm the teaching data you have en -
tered by carrying out thread trimming.
Then, the screen returns to the "Sew-
ing data edit screen" which reflects the
sewing condition you have changed.
8) In the case additional registration of a
step to the sewing pattern is possible,
step
that is not yet set will be dis-
played at the rightmost field.
<Teaching input screen (In the case the step changeover
basis is one-touch type changeover)>
Or, in the case the step changeover
basis is the detection of a multi-layered
portion of material, the multi-layered
portion detection sensor value
B is
entered to the step changeover sensor
value
C by pressing .
Change other sewing conditions with
.
・ : Stitch length
・ : Presser foot pressure
・ : Needle thread tension (left)
・
: Needle thread tension (right)
B C