JUKI SC-956, Instruction Manual

Page: 170 / 185

– 165 –
② Precautions to be taken when handling USB devices
・ Do not connect to the USB connection terminal other than the USB memory.
It may cause failure.
・ Do not leave the USB device or USB cable connected to the USB port while the sewing ma-
chine is in operation. The machine vibration can damage the port section resulting in loss of
data stored on the USB device or breakage of the USB device or sewing machine.
・ Do not insert/remove a USB device during reading a program or sewing data.
It may cause data breakage or malfunction.
・
When the storage space of a USB device is partitioned, only one partition is accessible.
・ Never forcefully insert a USB thumb drive into the USB connector while carefully checking the
orientation of the USB thumb drive. Forceful insertion of the USB thumb drive can cause failure.
・ JUKI does not compensate for loss of data stored on the USB device caused by using it with
this sewing machine.
・ In principle, connect only one USB thumb drive to the operation panel. When two or more de-
vices/media are connected/inserted, the machine will only recognize one of them. Refer to the
USB specifications.
・
Do not turn the power OFF while the data on the USB flash drive is being accessed.
③
USB specifications
・
Conform to USB 1.1 standard
・ Applicable devices
*1
....... USB memory
・ Format supported ........... FAT 12, FAT 16, FAT 32
・ Applicable medium size .. 4.1MB to 2TB
・ Consumption current ...... The rated consumption current of the applicable USB devices is 500 mA
at the maximum.
*1
JUKI does not guarantee operation of all applicable devices. Some device may not operate due
to a compatibility problem.
9-9-2. USB
Sewing data, custom pattern data and condensation custom data can be copied on a commercial-
ly-available USB thumb drive.
Refer to
"9-9-1. Data communication"p.162
for details of how to copy the sewing data on a USB
thumb drive.
① Position of the USB connector
[USB thumb drive insertion position]
The USB connector is provided on top
❶
of the
operation panel.
To use a USB thumb drive, remove connector
cover
❷ and insert the USB thumb drive into
the USB connector.
* In the case a USB thumb drive is not used,
the USB connector should be protected
with connector cover
❷ without excep-
tions.
If dust or the like enters the USB connec-
tor, a failure can be caused.
❶
❷