Johnson Controls YVAHP0721CW Series, Service Manual

Page: 330 / 416

4-46
SM-16007
MAINTENANCE
(3) Install the electrical box using reverse procedures.
NOTES:
1. Check to ensure that the tube end of the waterproof vinyl pipe and the connectors are in the
HOHFWULFDOER[6HFXUHWKHP¿UPO\ZLWKDFDEOHFODPSZKHQZLULQJDVVKRZQLQWKH¿JXUHEHORZ
2. Secure the wiring connecting each electrical part and the electrical box with a plastic band to avoid
direct contact with the compressor, piping, and plate edges.
3. Secure the wiring neatly with a cable clamp and make sure that the wiring is not be held down by
the electrical box cover. Otherwise, the wiring may be damaged when the cover is closed.
6HFXUHWKHIDQPRWRUZLULQJZLWKDFDEOHFODPSDVVKRZQLQWKH¿JXUH
Tool Phillips Screwdriver, Pincher Tool
TURN OFF all power source switches.
NOTES:
1. When reassembling the electrical component, match the terminal numbers with the mark band numbers .
If they are incorrectly connected, malfunction may occur or the electrical components may be damaged.
6HWWLQJVRI',3VZLWFKHVGLIIHUDFFRUGLQJWRWKHPRGHO:KHQUHSODFLQJWKHRXWGRRUXQLW3&%UHIHUWR³)LHOG
Work Instructions.”
Cable Clamp
Electrical Box
More than
13/32 inch
(10mm)
More than 13/32 inch (10mm) of waterproof vinyl pipe
should be in the electrical box.
Tube End of Waterproof Vinyl Pipe
Details for Securing the Vinyl Pipe Edge
Plastic Band