Appendix
8
–
The
Fixture
Editor
DMX
Chart
tab:
The change to the channel range is reflected in the DMX Range column.
n and select the range value section as below.
Rotation Mode
: Expand this sectio
Gobo Wheel Rotation is to be 128-255,
By default most fixtures have clockwise and
a stop value. The editor places ranges for
our fixture only rotates in one direction so
the first thing that is required is to delete the Anti-clockwise range, the Stopped
Select the Anti-clockwise range:
As the specification requires the range for
only one range of values is required.
counter clockwise values as well as
these by default. The mechanism in
range can remain and set to 127 if desired. This will make zero rotation on the
controls stop the wheel spinning at the last indexing value.
Now click the
button to remove the range.
Channel
12:
Gobo
Wheel
(cont.)
As the ranges for Stopped and Clockwise rotation are the same as the
her changes are required. The ranges for gobo
manufacturers specification no ot
wheel rotation are now set.
Wheel Slots
: Expand this section and Select it. Notice a single Open slot is loaded
with a range of 0,0.
Use the
button to create as many slots as is required. In this case add
five slots to make a total of six.
Vista
User
Guide,
Version
2
21
‐
57
Summary of Contents for Vista I3
