Jands Vista I3, User Manual

Page: 289 / 308

Appendix 10 – the touchpad and the pen tablet Using a pen
Eraser
se the eraser, hold the Gr To u ip Pen upside down. When the eraser is within
The
same click and double-click functions
per
ng the
in Removing and installing the Duo Switch .
Move the Grip Pen above the pen tablet display screen to position the screen
on where you place the pen (absolute
he display screen to make a selection.
lay screen once with the pen tip, or touch the pen to the display
hen the pen is perpendicular to
the tablet screen.
en to move the
Pen tablet
d or sheet of paper.
proximity of the active area, the tablet reports the pen coordinates and the
pressure applied to the eraser.
eraser is not implemented in Version 1 of the Vista software.
DuoSwitch
The DuoSwitch can be used to perform the
as the tip switch. Toggle the DuoSwitch in either direction to activate the up
or lower button functions.
Â
If you do not care to use the side switch, you can remove if by followi
directions
Using a pen
Pointing and Selecting
cursor. The cursor jumps to the locati
positioning). Press the pen tip on t
Clicking
Tap the disp
screen with enough pressure to generate a mouse click.
Double ‐ Clicking
Press the upper side switch, or quickly tap the display screen twice in the same
place with the pen tip. Double-clicking is easier w
Dragging
Select an object, then slide the pen tip across the display scre
object.
Erasing
Erasing is not currently supported in the Vista system.
Working with the
As you work with the pen tablet, you can rest your hand lightly on the display
screen, just as if it were a drawing boar
Vista User Guide, Version 2 23 ‐ 75