Jands Vista I3, User Manual

Page: 243 / 308

Appendix 4 – tracking backup Backup status
On the slave console there are two options
1.
e
2.
C console take over the
sh
If neither button is clicked the slave will take over when the countdown is
e or control surface
e backup console in
the event of a failure.
e backup console
ow’ button on the
Ba
their respective backup
windows. To do this select the status tab in the Backup window:
Click on the ‘Abort’ button to prevent the slave console from taking over th
show and beginning to output.
lick on the Failover now button to have the slave
ow immediately and begin to output.
finished.
Â
If you are using the DMX outputs on your Vista consol
you must swap your DMX cables from the master to th
Manually switching to th
To manually switch to the slave device click on the ‘Failover N
Failover tab.
ckup status
You can check the status of the master and slave in
The master console or computer should show the Local Time Controller and
Local DMX Output being On.
The slave console or computer should show the Local Time Controller and Local
DMX Output being Off – unless the master has failed.
Vista User Guide, Version 2 17 ‐ 29