Jands Vista I3, User Manual

Page: 250 / 308

MSC lighting messages Appendix 6, Using midi show control (MSC) to control cues
This message… does this…
R ng. If no
s
t
d.
esume Causes Stopped transition(s) to continue runni
Cue Number is specified, all Stopped transition
Resume. If a Cue Number is specified, only tha
transition Resumes, leaving all others unchange
All_O all cuelist intensity output to 0% without changing
ther features. Equivalent to fading the Grand
Master to 0%.
ff Turns
any o
The console status prior to All_Off can be re-established
by using the Restore command. Equivalent to fading the
Grand Master to 0%
Restore Re-establishes operating status to exactly as it was prior
to ALL_OFF.
Reset Releases all running cues..
Advanced Midi options
everal cuelists at once. To do this
cuelists. Vista supports the MSC You can send a message (for example Go) to s
you first send an Open message to each of the
messages to open and close cuelists.
This message… does this…
Open_cuelist OPEN_CUE_LIST
Makes a Cu
When OPEN
List becomes active and
normal show
must be sent.
If the
exist, no change occurs.
e List available to all other commands and
includes any cues it may contain in the current show.
_CUE_LIST is received, the specified Cue
cues in it can be accessed by
requirements. Q_list in Standard Form
specified Cue List is already Open or if it does not
19 ‐ 36 Vista User Guide, Version 2