Jands Vista I3, User Manual

Page: 155 / 308

Working with cuelists Using commands within cuelists
This option… does this…
Inh linds) or un-inhibits the cuelist. You must enter ibit Inhibits (b
either ‘on’ or ‘off’ in the Parameter box.
Rate The Parameter field is a text field and only allows valid
input (e.g. numerical BPM value).
R lease All Releases All active cuelists. No other options are
available when this command is selected. e
Timecode reset Resets the timecode to 00:00:00:00.
Timecode enable Sets a cuelist to be activated by Timecode.
Jum ecific cue within a cuelist. p Allows you to Jump to a sp
Snapshot Activates the snapshot selected in the parameter field.
Release others Releases all active cuelists except the one containing this
command.
3.
Select the Cuelist to be triggered from the Cuelist column or click on the
‘Browse’ button to open the mini components window. Open this window to
select a cuelist, from the components window cuelists layout, and click OK.
4.
Enter an on or off command or cue number, if applicable, in the Parameter
field. You can also click on a spot in the timeline ruler and tick the ‘Insert at
cursor’ box to put the command at that position.
5.
The command will normally be placed in the cuelist at the current playhead
position. If you want to put it at a different position enter a time in the At
field.
6.
Enter a descriptive label in the Label/Description field if required. This text
will appear alongside the command, in the timeline.
7.
Normally Vista creates a new end cue if you place the command beyond the
end of the cuelist. If you prefer to extend the last cue of the cuelist tick the
'Expand existing cue' checkbox.
8.
Click ‘Insert’ to insert the command and close the window.
Vista User Guide, Version 2 6 ‐ 49