Jands Vista I3, User Manual

Page: 191 / 308

Using the console hardware The Super Playback / Programmer controls
Editor (aka Programmer) mode
e on screen palettes to adjust setting for
Intensity, Position, Colour, Gobo and Miscellaneous parameters
n
When you select fixtures in the Chooser or Timeline window the hardware
controls can be used instead or th
Programmer mode
If the controls are not already in Programming mode press the menu button the
the button labelled ‘IPCG’ to switch into to programmer mode:
This button… does this…
I /POS Press this
Intensity p button to put the encoders and lower 6 buttons in
lus Position mode. Pressing it again cycles the
controls through any available parameters or alternate
odes (Angular position and Strobe & Shutter). m
Col Press this button to put the encoders and lower 6 buttons in
s the controls
through any available parameters or alternate modes (CMY,
RGB, Colour Wheel Colour )
Colour mode (HSV). Pressing it again cycle
Gobo Press this button to put the encoders and lower 6 buttons in
gh Gobo mode. Pressing it again cycles the controls throu
any available parameters or alternate modes.
Vista User Guide, Version 2 11 ‐ 5