Jands Vista I3, User Manual

Page: 234 / 308

Installation (Windows XP, Vista & 7) Appendix 2 – installing new software
11.
Click ‘Quit’. T series consoles will now power down, while I3 consoles will
reboot.
U date. If it
becom nsole must be re-imaged.
Installation (Windows XP, Vista & 7)
2 Windows Update files on a PC:
1.
Close all open applications on the PC.
sta USB devices.
to un-install it - simply install
the new version over the top of the old one.
4.
5.
6.
all.
7.
You files from a
Mac or PC to the Vista or vice versa using FTP (File Transfer Protocol, a common
method of file transfer).
Hardware setup
Connect the console and computer to an Ethernet hub or switch using a standard
Ethernet cable, or connect the two devices to each other using a crossover
Ethernet cable.
nlike Vista 1.13, in Vista V2 there is no simple way to revert an up
es necessary to revert to a previous version the co
The Vista V2 software can be installed on a Windows PC running XP, Vista, or
Windows 7. Both 32 and 64 bit versions of Windows are supported. The
recommended PC specification is an Intel i3 CPU, 2GB RAM, and 500MB disk
space.
Â
If you want to run Vista 1.13 on the same machine, the 1.13 version must be
Build 5295 or later.
To install Vista V
2. Switch off and disconnect all Jands Vi
3.
Launch the Vista V2 Windows Installer file. If an earlier version of Vista V2
is already installed on the PC, there’s no need
Click ‘Next’.
A location for the installed files is selected automatically. If required you can
change the location. Click ‘Next’.
A location for the User Data folder (your show files etc) is selected
automatically. If required you can change the location. Click Inst
When the installation is complete, click Finish.
Connecting to the console via FTP
can take advantage of the Vista’s built-in FTP server to move
15 ‐ 20 Vista User Guide, Version 2