Jands Vista I3, User Manual

Page: 251 / 308

Appendix 6, Using midi show control (MSC) to control cues MSC lighting messages
This message… does this…
Close_cuelist Makes a Cue List unavailable to all other command
excludes any cues it may contain from the current s s and
how.
When CLOSE_CUE_LIST is received, the specified Cue
List becomes inactive and cues in it cannot be accessed
quirements, but the status of the cues
change. Q_list in Standard Form must
If the specified Cue List is already Closed or if it does not
by normal show re
in the list does not
be sent.
exist, no change occurs.
Midi Timecode options
You can also control Vista’s internal timecode clock with midi commands.
This message… does this…
Start_Clock Starts Vista’s internal timecode clock. If the clock is
ck is paused
Start
eously.
If Q_list is sent in Standard Form, only the clock in that
already running, no change occurs. If the clo
it continues counting from the time value which it
contained while it was paused.
If Q_list is not sent, the clocks in all Open Cue Lists
simultan
Cue List Starts.
Stop_Clock ista’s internal timecode clock. If the clock is
already stopped, no change occurs. While the clock is
t
not sent, the clocks in all Open Cue Lists Stop
ard Form, only the clock in that
tops..
Stops V
stopped, it retains the time value which it contained a
the instant it received the STOP command.
If Q_list is
simultaneously.
If Q_list is sent in Stand
Cue List S
nds:
by_Minus, Sequence_Plus,
Â
Vista does not support these comma
Load, Set, Fire, Standby_Plus, Stand
Sequence_Minus, Open_Q_Path, Close_Q_Path
Vista User Guide, Version 2 19 ‐ 37