Jands Vista I3, User Manual

Page: 41 / 308

Patching your rig Setting fixture properties
lamp life or prevent fixtures from ever reaching full intensity.
Dimmer
Curve
ons;
nverse
This popup lets you select a dimmer fade curve. The default
option is Linear but you can select one of the available opti
Linear, Damp, Snap Start, Snap end, Square Law, I
Square, Switch, Hot power, Flourescent and Sinus
Preview in the chooser, to Check this box if you’d like the fixture icons, in
Chooser display the effects of the Intensity transforms.
Invert pan is
e sweep
Selecting this checkbox reverses the sweep of the pan for th
fixture. This is useful when you’re coordinating th
directions of fixtures hung in different directions.
Invert tilt
e sweep
Selecting this checkbox reverses the sweep of the tilt for this
fixture. This is useful when you’re coordinating th
directions of fixtures hung in different directions.
Swap
pan/tilt
is
the movements of fixtures hung on
Selecting this checkbox swaps the pan and tilt controls, so the
fixture will pan when given a tilt command and vice-versa. Th
is useful for coordinating
vertical trusses or pipes.
Preview the chooser, to
display the effects of the Position transforms.
Check this box if you’d like the fixture icons, in
Advanced transforms
The advanced button provides access to more Fixture ‘Transformers’ that allow
you to further customize fixtures. For example the Pan and Tilt Offset parameters
en the transform window
allow you to correct the home position for fixtures that are hung at an angle.
To add a transform click the Advanced button to op
then click the Add button to choose a transformer.
Vista User Guide, Version 2 4 ‐ 7