Jands Vista I3, User Manual

Page: 195 / 308

Using the console hardware The Super Playback / Programmer controls
This button… does this…
Jump Opens the cuelist jump window on the main screen. Used to
jump from one cue to another cue ou
t of sequence. Select the
Cue you want to jump to in the Jump window. See Using the
Jump window on page 11-10
Press Go to fade to that cue.
Shuttle Enables the middle encoder for manual co
Move the encoder clockwise to advance an ntrol of playback.
d anti-clockwise
to go backwards.
Release Releases the cuelist. Fixtures return to the previous settings
or to their defaults.
Select Selects the cuelist on the SuperPlayback.
Cuelist Chase mode
In the Cuelist ‘Ch sing. change the chase rate
and select the cha d
This button… does this…
ase’ mode you can start a cuelist cha
se irection:
Rate Enables the left encoder for rate control of playback. Turn
the encoder to the left to slow the playback rate and to the
right to speed it up.
Sync Synchronises the chase
Forward Turns the chase mode on and runs forwards. If the cuelist is
already chasing forward pressing the button will turn chase
mode off.
Reverse Turns the chase mode on and runs backwards. If the cuelist
is already chasing backward pressing the button will turn
chase mode off.
Bounce Turns the chase mode on in bounce mode (i.e. run from firs
to last cue then last to first cue). If the cuelist is already
bouncing pressing the button will turn chase mode off. t
Random Turns the chase mode on and runs in a random order. If the
cuelist is already in random pressing the button will turn
chase mode off.
Vista User Guide, Version 2 11 ‐ 9