Jands Vista I3, User Manual

Page: 148 / 308

Timeline events Working with cuelists
The event label shows:
•
the event sett
CMY settings and
include icons.
•
the fade time.
Snap events
Events that are set to a zero second (0s)
an arrow at the left end:
ing. In the example above the event shows the
an icon of the colour. Not all event types
fade time are shaped like a banner with
When you select a snap event there is only one selection handle (the aqua
coloured square). When you click on the handle you can drag in either direction
and once the event has a length a second handle will appear.
C events
Events that you’ve edited, since the cue was last saved, show with a hatched
pattern:
hanged
around Moving events
Each event has three attributes: a start point, duration and a finish point. The
event bars on the tim
how long it will take
eline show you where each event starts and finishes and
to reach its end point:
To adjust the start or end point of an event, select the event and drag it along the
te that the grid has an automatic ‘snap-to’ feature
on the right-hand end and drag it left to shorten the event, or right to
example shown above three separate attributes of the event have
different timings:
plete at 2s
the Beam event starts at 0s and is complete at 1.75s.
timeline to the left or right. No
that makes it easy to align start and end points.
To change the duration of an event, click on it and select the ‘handle’ (aqua
square)
lengthen it.
Note that in the
•
the Intensity event starts at 0s and is com
•
the Position event starts at 0s and is complete by 1s
•
the Colour event starts at 0s and is complete at 1.5s
•
6 ‐ 42 Vista User Guide, Version 2