Jands Vista I3, User Manual

Page: 248 / 308

Configuring the midi port Appendix 6, Using midi show control (MSC) to control cues
19. Appe
contro to control cues
ndix 6, Using midi show
l (MSC)
You can activate and g Midi Show Control (MSC)
m via the mid
i n on using
Cuelists on page 9-4
onfiguring the midi port
et a ‘device ID’ that Vista will listen on. This
idi controller is sending on. To set the device
control cues by sendin
essages
nformatio
i in port on the Vista L, T, I and S series consoles. For
Midi Time Code (MTC) see Using Timecode to control
C
Before you use midi you have to s
should correspond to the ID the M
ID select ‘User preferences’ from the File menu and click on the ‘External
Control’ tab.
Set the Midi Show Control Device ID
midi software packag
Â
Tip: Tick the ‘Use
settings as defaults for new shows.
to correspond with your controller or the
e you are using .
these settings for new shows’ checkbox to save these
19 ‐ 34 Vista User Guide, Version 2