INVT IPE300 Series, Opeartion Manual

Page: 364 / 383

IPE300 series engineering VFD Optional peripheral accessories
-353-
D.4.3 Recommended cable size
Table D-1 AC 3PH 380V (-15%)
–440V (+10%)
VFD model
Recommended cable size (mm²) Fixing screw
R, S, T
U, V, W
PE P1, (+) PB, (+), (-)
Terminal
screw
Fastening
torque (Nm)
IPE300-01R5-4 1.0/1.0 1.0/1.0 1.0/1.0 1.0/1.0 M4 1.2
–1.5
IPE300-02R2-4 1.0/1.5 1.0/1.5 1.0/1.5 1.0/1.5 M4 1.2
–1.5
IPE300-0004-4 1.5/2.5 1.5/2.5 1.5/2.5 1.5/2.5 M4 1.2
–1.5
IPE300-05R5-4 2.5/4 2.5/4 2.5/4 2.5/4 M5 2
–2.5
IPE300-07R5-4 2.5/4 2.5/4 2.5/4 2.5/4 M5 2
–2.5
IPE300-0011-4 4/6 4/6 4/6 4/6 M5 2
–2.5
IPE300-0015-4 6/10 6/10 6/10 6/10 M5 2
–2.5
IPE300-0018-4 10/10 10/10 10/10 10/10 M5 2
–2.5
IPE300-0022-4 10/16 10/16 10/16 10/16 M6 4
–6
IPE300-0030-4 16/25 16/25 16/25 16/25 M6 4
–6
IPE300-0037-4 25/25 16/16 25/25 25/25 M6 4
–6
IPE300-0045-4 25/35 16/16 25/35 25/35 M8 9
–11
IPE300-0055-4 35/50 16/25 35/50 35/50 M8 9
–11
IPE300-0075-4 50/70 25/35 50/70 50/70 M8 9
–11
IPE300-0090-4 70/95 35/50 70/95 70/95 M10 18
–23
IPE300-0110-4 95/95 50/50 95/95 95/95 M10 18
–23
IPE300-0132-4 95/150 50/70 95/150 95/150 M12 31
–40
IPE300-0160-4 150/185 70/95 150/185 150/185 M12 31
–40
IPE300-0185-4 185/185 95/95 185/185 185/185 M12 31
–40
IPE300-0200-4 185/2×95 95/95 185/2×95 185/2×95 M12 31
–40
IPE300-0220-4 2×95/2×95 95/95 2×95/2×95 2×95/2×95 M12 31
–40
IPE300-0250-4 2×95/2×150 95/150 2×95/2×150 2×95/2×150 M12 31
–40
IPE300-0280-4 2×150/2×150 150/150 2×150/2×150 2×150/2×150 M12 31
–40
IPE300-0315-4 2×150/2×185 150/185 2×150/2×185 2×150/2×185 M12 31
–40
IPE300-0355-4 2×185/3×150 185/2×120 2×185/3×150 2×185 / 3×150 M12 31
–40
IPE300-0400-4 3×150/3×185 2×120/2×150 3×150/3×185 3×150/3×185 M12 31
–40
IPE300-0450-4 3×185/3×185 2×150/2×150 3×185/3×185 3×185/3×185 M12 31
–40
IPE300-0500-4 3×185 2×150 3×185 3×185 M12 31
–40
Note:
1. Cables of the sizes recommended for the main circuit can be used in scenarios where the
ambient temperature is lower than 40°C, the wiring distance is shorter than 100 m, and the
current is the rated current.
2. The terminals P1, (+), PB, and (-) are used to connect to DC reactors and braking accessories.