Goodrive300-19 series open loop vector inverter special for hosit Function parameters
-112-
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
multi-step
speed
P17.39
Zero
position
state
Display zero position state
Range: 0~2
0
●
P19 Group Function group special for hoisting
P19.00
Operating
mode
selection
The operating mode is a quick mode set according to
industrial applications and customer requirements,
including:
0: Common mode
1: Joystick mode
2: Remote control mode
3: Hierarchical joystick mode
4: Hierarchical remote control mode
5: Electromotion potentiometer mode
Users can select the mode on basis of actual
conditions. See the standard wiring diagrams and
function code settings corresponding to the modes in
Chapter 7. It only needs to set P19.00 to meet the
requirements of basic applications. The modes
cannot satisfy all applications, so users can select an
approximate mode and fine-tune the parameters.
0
◎
P19.01
Brake and
contactor
control
selection
0x00~0x11
LED ones:
0: Brake is controlled by external controller
1: Brake is controlled by inverter
LED tens:
0: Contactor is controlled by external controller
1: Contactor is controlled by inverter
Note: When the brake is controlled by the external
controller,
output
and
choose
ready
for
switching-off and switching-on signals by P6
relay to inform the external controller sends
0x01
◎
