Twister / Twister Junior
Service Manual
Issued: 21.01.02
Page 77
Note:
The Recaro seat can be designed as a complete seating module (model DS) with
integrated control, or as model LX with detachable headrest and backrest module.
10.2.1 Disassembly of the headrest, the safety belt and the push handle
•
Remove clamps under the guide tubes and pull headrest (1) upwards out of the backrest
module 2).
•
Loosen four screws at the back of the backrest module (2) and detach safety belt (9).
•
Loosen clamping lever (6) and detach push bar (4) with handle (3) from its holder (5).
•
If necessary, pull handle (3) from the push bar (4).
•
Loosen four screws (8) with washers (7) completely and detach holder (5) from backrest
module (2).
10.2.2 Disassembly of the headrest, the safety belt and the push handle
•
Reassembly takes place in the reverse order.