Intermec PC23, User Manual

Page: 179 / 190

Appendix B — Default Settings
PC23 and PC43 Desktop Printer User Manual 165
Inner
Authentication Selects the authentication method
that is used when the EAP type is
EAP-FAST, PEAP, or TTLS. MSCHAPv2
CA Certificate Sets the name of the Certificate
Authority (CA) that verifies the server
certificate. This CA should be the
same one that was used to sign the
server certificate. intermec.pem
Client Certificate Sets the name of the client certificate
the printer uses to authenticate to
the network using EAP-TLS.
Maximum length is 128 characters.
None
Client Key Sets the private key the printer uses
for EAP-TLS. Maximum length is 128
characters. Use the certinstall.sh
script to install the certificate
correctly. None
Server Common
Name 1 Sets the certificate name that is on
the primary authentication server. If
this value is none, then the value for
Server Common Name 2 is used.
Range is 1 to 96 characters. None
Server Common
Name 2 Sets the certificate name that is on
the secondary authentication server.
If this value is none, then the value
for Server Common Name 1 is used.
Range is 1 to 96 characters. None
Validate
Certificate Determines if the identity of the
authentication server is verified
using its certificate when using
EAP-TTLS, PEAP, or EAP-TLS.
Intermec recommends that you set
Validate Certificate to
Yes .
No
PAC Sets the name of the Protected Access
Credential (PAC) that is used for
EAP-FAST authentication. The
printer uses this file if Acquire PAC is
on and the current installed PAC fails
to authenticate the printer to the
network. eap-fast.pac
Wireless 802.11 Security Settings (Continued)
Setting Description Default