Intermec PC23 User Manual Download Page 128

Page: 128 / 190

Chapter 5 — Troubleshoot the Printer

114

PC23 and PC43 Desktop Printer User Manual

Restore Defaults by Using a Hardware-Based
Reset

You can restore the printer defaults by performing a hardware-based
reset.

Turn the printer off.

Pull one or both of the printer latches forward and lift the printer
lid.

Turn the printer on.

My icon printer uses the ZSim
printer language and prints
configuration labels every time I
turn the power on.

Icon printers running ZSimprint
configuration labels on startup by
default. To prevent this, use Notepad to
create a .txt file named
“STLABPD41nPM43.txt”. In the file, type
“0”. Copy the file to the /home/user
directory on the printer.

My printer does not
communicate with my desktop
PC when they are connected with
the USB-to-parallel adapter cable.

Windows may not have installed the
driver. Follow these steps:

Connect the adapter cable to the
printer but not to the PC.

Turn the printer on and wait until the
startup process is complete.

Turn the printer off, and then turn the
printer on.

Connect the adapter cable to the PC.
Windows auto-detects the printer and
installs the driver.

After the driver is installed, run a test
print.

Problems and Possible Solutions (Continued)

Problem

Possible Solution

Summary of Contents for PC23































































































































































































Search results

Summary of Contents for PC23

Reviews:

Related manuals for PC23

Brands by name

Popular brands

Intermec PC23, User Manual

Search results

Summary of Contents for PC23

Reviews:

Related manuals for PC23

Brands by name

Popular brands