Intermec PC23 User Manual Download

Page: 111 / 190

Chapter 4 — Configure the Printer

PC23 and PC43 Desktop Printer User Manual

To upload all files to the printer, select

Install All

and then press

. All valid files are uploaded to the printer memory.

To upload only one file at a time:

Select the type of item you want to upload (

Applications

Fonts

Forms/Layout

Web Forms

Images

Fingerprint

Programs

, or

Display

) and then press

Select the file from the list and then press

. The file is

uploaded to the printer memory.

Export Applications and Files to a USB Storage
Device

This topic explains how to export applications and files from the
printer to a USB storage device.

Make sure the USB storage device has a single partition and is
formatted as FAT16 or FAT32.

Insert the storage device into the USB host port on the printer. The
USB Device menu appears.

Select

Export Resources

and then press

. All applications and

files in printer memory are copied to the USB storage device.

Export a Configuration File to a USB Storage
Device

You can save an .xml configuration file to a USB storage device and
install it on other printers.

Make sure the USB storage device has a single partition and is
formatted as FAT16 or FAT32.

Insert the storage device into the printer USB host port.

From the Ready screen, press

. The Main Menu appears.

Note:

You can only export applications and files that you previously

uploaded to the printer memory.

Summary of Contents for PC23































































































































































































Search results

Summary of Contents for PC23

Reviews:

Related manuals for PC23

Brands by name

Popular brands

Intermec PC23, User Manual

Search results

Summary of Contents for PC23

Reviews:

Related manuals for PC23

Brands by name

Popular brands