Intermec PC23 User Manual Download Page 96

Page: 96 / 190

Chapter 3 — Connect the Printer

PC23 and PC43 Desktop Printer User Manual

The icon is white when the Bluetooth connection is active, and gray
when the connection is inactive or disabled.

Connect to a Bluetooth Device by Reading a Bar Code

To connect a Bluetooth-enabled bar code scanner to the printer, use
the scanner to read the “Scan to Connect” bar code.

Make sure your printer is ready to print.

On your desktop PC, start a web browser.

In the address field, type the printer IP address and then press

Enter

. The printer web page appears.

Click

Services

and then select

Print Test Labels > Printer

Settings

In the Printer Settings screen, locate the Bluetooth Settings label
and click

Print

. The printer prints the Bluetooth Settings label.

Make sure your Bluetooth scanner is turned on and discoverable,
and that the device is in range of the printer.

Use the scanner to read the “Scan to Connect” bar code on the
Bluetooth Settings label. The printer attempts to connect to the
scanner.

Connect to a Bluetooth Device Using a Wizard

If your printer has the LCD interface, you can also use the Bluetooth
wizard to discover and connect to a Bluetooth device, such as a
keyboard.

Make sure your Bluetooth device is turned on and discoverable,
and that the device is in range of the printer.

From the printer Ready screen, press

. The Main Menu appears.

Select

Wizards > Communications > Bluetooth

Follow the instructions to discover and connect to your Bluetooth
device.

If you are unable to connect to the Bluetooth device, change the
printer Bluetooth settings or move the Bluetooth device closer to
the printer.

Summary of Contents for PC23































































































































































































Search results

Summary of Contents for PC23

Reviews:

Related manuals for PC23

Brands by name

Popular brands

Intermec PC23, User Manual

Search results

Summary of Contents for PC23

Reviews:

Related manuals for PC23

Brands by name

Popular brands