Chapter 4: Commands for CLI configuration
pdcheck
Allows user to enable or disable per port PD Alive Check function.
enable
PD alive check enable.
Default:
Disabled
Usage Guide:
To enable
PD Ping Alive Check
function
of
PoE
for specific interface.
Example:
To enable
PD Ping Alive Check
function
of
PoE
for
GigabitEthernet X/X.
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
poe pdcheck enable
poe pdcheck interval
Command:
poe pdcheck interval <10-300>
poe
Power Over Ethernet.
pdcheck
Allows user to enable or disable per port PD Alive Check function.
interval
set how long system should be issue a ping request to PD for
detecting
whether PD is alive or dead.
<10-300>
interval <10~300>
Default:
30
Usage Guide:
To configure
PD Ping Alive Check
interval
of
PoE
for specific interface.
Example:
To configure
PD Ping Alive Check
interval (100 seconds)
of
PoE
for
GigabitEthernet X/X.
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
poe pdcheck interval 100
poe pdcheck reboot-time
Command:
poe pdcheck reboot-time <30-180>
poe
Power Over Ethernet.
pdcheck
Allows user to enable or disable per port PD Alive Check function.
reboot-time
set the PoE device rebooting time.
<30-180>
reboot-time <30-180>
Default:
90
Usage Guide:
To configure
PD Ping Alive Check
rebooting time
of
PoE
for specific interface.
Example:
To configure
PD Ping Alive Check
rebooting time (100 seconds)
of
PoE
for
NS3500-24T-4C Managed Switch Command Guide
89
