Chapter 4: Commands for CLI configuration
interface
Example:
To enable
point to point mode
(shared) of
CIST Normal Port Configuration
for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
spanning-tree edge
spanning-tree mst <Instance : 0-7> cost
Command:
spanning-tree mst <Instance : 0-7> cost <Cost : 1-200000000>
| auto
spanning-tree
Spanning Tree protocol
mst
STP bridge instance
<Instance : 0-7>
instance 0-7 (CIST=0, MST2=1...)
cost
STP Cost of this port
<Cost : 1-200000000>
Cost range
auto
Use auto cost
Default:
Auto
Usage Guide:
To configure
Path Cost
of
CIST / MST Normal Port Configuration
for specific
interface
Example:
To enable
Path Cost
(100) of
CIST / MST Normal Port Configuration
(CIST)
for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
spanning-tree mst 0 cost 100
spanning-tree mst <Instance : 0-7> cost
Command:
spanning-tree mst <Instance : 0-7> port-priority <Prio : 0-240>
spanning-tree
Spanning Tree protocol
mst
STP bridge instance
<Instance : 0-7>
instance 0-7 (CIST=0, MST2=1...)
port-priority
STP priority of this port
<Prio : 0-240>
Range (lower higher priority)
auto
Use auto cost
Default:
Auto
Usage Guide:
To configure
Path Cost
of
CIST / MST Normal Port Configuration
for specific
interface
Example:
106
NS3500-24T-4C Managed Switch Command Guide
