Chapter 4: Commands for CLI configuration
Switch# configure terminal
Switch (config)#
snmp-server host IFS
Switch
(config-snmps-host)#
traps switch rmon stp
version
Command:
version { v1 [ <v1_comm> ] | v2 [ <v2_comm> ] | v3 [ probe |
engineID <v_word10_to_32> ] [ <securtyname> ] }
version
Set SNMP trap version
v1
SNMP trap version 1
<V1Comm : word127>
SNMP trap community
v2
SNMP trap version 2
<V2comm : word127>
SNMP trap community
v3
SNMP trap version 3
<Securtyname : word32>
seucrity name
engineID
Configure trap server's engine ID
probe
Probe trap server's engine ID
Default:
Disabled
Usage Guide:
To configure
Version
of
SNMP
Example:
To configure
Version (below table)
of
SNMP
Switch# configure terminal
Switch (config)#
snmp-server host IFS
Switch
(config-snmps-host)#
version v2 IFS
spanning-tree aggregation
Command:
spanning-tree aggregation
spanning-tree
Spanning Tree protocol
aggregation
Aggregation mode
Default:
None
Usage Guide:
To enter
aggregation
mode
of
STP
Example:
To enter
aggregation
mode
of
STP
Switch# configure terminal
Switch (config)#
spanning-tree aggregation
Switch (config-stp-aggr)#
224
NS3500-24T-4C Managed Switch Command Guide
