Chapter 4: Commands for CLI configuration
retransmit
Specify the number of retries to active server
<Retries : 1-1000>
Number of retries for a transaction
Default:
3
Usage Guide:
To configure the retransmitted time of
Radius-Server
Example:
To configure the retransmitted time (5)
of
Radius-Server
Switch# configure terminal
Switch (config)#
radius-server retransmit 5
radius-server timeout
Command:
radius-server timeout <Seconds : 1-1000>
radius-server
Configure RADIUS
timeout
Time to wait for a RADIUS server to reply
<Seconds : 1-1000>
Wait time in seconds
Default:
5
Usage Guide:
To configure the
timeout
of
Radius-Server
Example:
To configure the
timeout
(10)
of
Radius-Server
Switch# configure terminal
Switch (config)#
radius-server timeout 10
rmon alarm
Command:
rmon alarm <id> {<oid_str> | {{ ifInOctets | ifInUcastPkts |
ifInNUcastPkts | ifInDiscards | ifInErrors | ifInUnknownProtos
| ifOutOctets | ifOutUcastPkts | ifOutNUcastPkts |
ifOutDiscards | ifOutErrors } <ifIndex>}} <interval: 1-
2147483647> { absolute | delta } rising-threshold
<rising_threshold: -2147483648-2147483647>
[<rising_event_id: 0-65535>] falling-threshold
<falling_threshold: -2147483648-2147483647>
[ <falling_event_id: 0-65535> ] { [ rising | falling | both ] }
rmon
Remote Monitoring
alarm
Configure an RMON alarm
<oid_str>
MIB object to monitor
ifInDiscards
The number of inbound packets that are discarded even the packets
are normal
ifInErrors
The number of inbound packets that contained errors preventing
NS3500-24T-4C Managed Switch Command Guide
213
