Chapter 4: Commands for CLI configuration
show dot1x status
Command:
show dot1x status [ interface ( <port_type>
[ <v_port_type_list> ] ) ] [ brief ]
show
Show running system information
dot1x
IEEE Standard for port-based Network Access Control
status
Shows dot1x status, such as admin state, port state and last source.
interface
Interface
brief
Show status in a brief format
Default:
N/A
Usage Guide:
To display the
IEEE 802.1X status.
Example:
To display the
All of
IEEE 802.1X status
for brief.
Switch #
show dot1x status
GigabitEthernet 1/1 :
---------------------
Admin State Port State Last Source Last ID
------------------ --------------------- ----------------- ------------
-
Force Authorized Globally Disabled - -
Current Radius QOS Current Radius VLAN Current Guest
VLAN
-------------------- -------------------- --------------------
- - -
GigabitEthernet 1/2 :
---------------------
Admin State Port State Last Source Last ID
------------------ --------------------- ----------------- ------------
-
Force Authorized Globally Disabled - -
Current Radius QOS Current Radius VLAN Current Guest
VLAN
-------------------- -------------------- --------------------
- - -
show eps
Command:
show eps [ <inst> ] [ detail ]
show
Show running system information
eps
Ethernet Protection Switching
NS3500-24T-4C Managed Switch Command Guide
259
