Chapter 4: Commands for CLI configuration
poe priority
Command:
poe priority { low | high | critical }
poe
Power Over Ethernet.
priority
Interface priority.
critical
Set priority to critical.
high
Set priority to high.
low
Set priority to low.
Default:
2
Usage Guide:
To configure interface priority of
PoE
for specific interface.
Example:
To configure interface priority (low)
of
PoE
for
GigabitEthernet X/X.
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
poe priority low
poe time-range
Command:
poe time-range { profile1 | profile2 | profile3 | profile4 }
poe
Power Over Ethernet.
time-range
To bind a PoE time-range to the corresponding port.
profile1
The profile name of the PoE time-range to be bound to the port.
profile2
The profile name of the PoE time-range to be bound to the port.
profile3
The profile name of the PoE time-range to be bound to the port.
profile4
The profile name of the PoE time-range to be bound to the port.
Default:
Profile 1
Usage Guide:
To configure time-range profile of
PoE
for specific interface.
Example:
To configure time-range profile (Profile 3)
of
PoE
for
GigabitEthernet X/X.
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
poe time-range profile3
port-security
Command:
port-security
port-security
Enable/disable port security per interface.
Default:
Disabled
Usage Guide:
NS3500-24T-4C Managed Switch Command Guide
91
