Chapter 4: Commands for CLI configuration
Switch# configure terminal
Switch (config)#
ipv6 route 2001::7788/128 interface vlan 1
fe80::1
lacp system-priority
Command:
lacp system-priority <1-65535>
lacp
LACP settings
system-priority
System priority
<1-65535>
Priority value, lower means higher priority
Default:
32768
Usage Guide:
To configure
LACP
system-priority.
Example:
To configure
LACP
system-priority
(99)
.
Switch# configure terminal
Switch (config)#
lacp system-priority 99
line
Command:
line { <0~16> | console 0 | vty <0~15> }
line
Configure a terminal line
<0~16>
List of line numbers
console
Console terminal line
vty
Virtual terminal
Default:
N/A
Usage Guide:
To enter
line mode
Example:
To enter
line mode
(
vty 1
)
Switch# configure terminal
Switch (config)#
line vty 1
Switch (config-line)#
do
Command:
do < exec commands >
do
To run exec commands.
NS3500-24T-4C Managed Switch Command Guide
155
