Chapter 4: Commands for CLI configuration
snooping
Snooping MLD
robustness-variable
Robustness Variable
<IpmcUri : 0-31744>
0 - 31744 seconds
Default:
1
Usage Guide:
To configure
Unsolicited-Report-Interval of
MLD snooping
for specific VLAN
Example:
To configure
Unsolicited-Report-Interval
(99 seconds)
of
MLD snooping
for
VLAN X
Switch# configure terminal
Switch (config)#
interface vlan X
Switch (config-if-vlan)#
ipv6 mld snooping unsolicited-report-
interval 99
no
Command:
no
no
Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
for specific interface
Example:
To disable the function (
ip address dhcp
)
for
VLAN X
Switch# configure terminal
Switch (config)#
interface vlan X
Switch (config-if-vlan)#
no ip address dhcp
ip arp inspection
Command:
ip arp inspection
ip
Internet Protocol
arp
Address Resolution Protocol
inspection
ARP inspection
Default:
N/A
Usage Guide:
To enable
ARP inspection
Example:
To enable
ARP inspection
128
NS3500-24T-4C Managed Switch Command Guide
