Chapter 4: Commands for CLI configuration
rmon
Remote Monitoring
event
Configure an RMON event
<id: 1-65535>
Event entry ID
description
Specify a description of the event
<description>
Event description
log
Generate RMON log when the event fires
trap
Generate SNMP trap when the event fires
<community>
SNMP community string
Default:
None
Usage Guide:
To configure the
Event
of
RMON
Example:
To configure the
Event
(below table)
of
RMON
Switch# configure terminal
Switch (config)#
rmon event 1 log trap IFS description error
sflow agent-ip
Command:
sflow agent-ip { ipv4 <v_ipv4_addr> | ipv6 <v_ipv6_addr> }
sflow
Statistics flow
agent-ip
The agent IP address used as agent-address in UDP datagrams. Defaults
to IPv4 loopback address.
Default:
None
Usage Guide:
To configure the
agent IP address
of
sFlow
Example:
To configure the
agent IP address
(10.10.10.10)
of
sFlow
Switch# configure terminal
Switch (config)#
sflow agent-ip ipv4 10.10.10.10
sflow collector-address
Command:
sflow collector-address <hostname>
sflow
Statistics flow
collector-address
Collector address
<hostname>
IPv4 address or IPv6 address or hostname identifying the collector
receiver
NS3500-24T-4C Managed Switch Command Guide
215
