Chapter 4: Commands for CLI configuration
interface
Interface status and configuration
switchport
Show interface switchport information
access
Show access ports status
hybrid
Show hybrid ports status
trunk
Show trunk ports status
Default:
N/A
Usage Guide:
To display the
VLAN mode
.
Example:
To display the
VLAN mode
for
interface GigabitEthernet 1/1
.
Switch #
show interface GigabitEthernet 1/1 switchport
Name: GigabitEthernet 1/1
Administrative mode: access
Access Mode VLAN: 1
Trunk Native Mode VLAN: 1
Administrative Native VLAN tagging: disabled
Allowed VLANs: 1-4095
Hybrid port configuration
-------------------------
Port Type: C-Port
Acceptable Frame Type: All
Ingress filter: Disabled
Egress tagging: All except-native
Hybrid Native Mode VLAN: 1
Hybrid VLANs Enabled: 1-4095
show interface <port_type> <port_type_list> veriphy
Command:
show interface <port_type> <port_type_list> veriphy
show
Show running system information
interface
Interface status and configuration
veriphy
Run cable diagnostics and show result.
Default:
N/A
Usage Guide:
To display the result of
Cable Diagnostics
.
266
NS3500-24T-4C Managed Switch Command Guide
