Chapter 4: Commands for CLI configuration
To define 802.1X re-authentication frequency for
Network Access Server
Example:
To define 802.1X re-authentication frequency with 78 times for
Network Access
Server
Switch# configure terminal
Switch (config)#
dot1x max-reauth-req 78
dot1x system-auth-control
Command:
dot1x system-auth-control
Default:
Disable
Usage Guide:
To enable 802.1X service for
Network Access Server
Example:
To enable 802.1X service for
Network Access Server
Switch# configure terminal
Switch (config)#
dot1x system-auth-control
dot1x timeout quiet-period
Command:
dot1x timeout quiet-period <10-1000000>
quiet-period
Time in seconds before a MAC-address that failed authentication
gets a new authentication chance.
Default:
10
Usage Guide:
To configure 802.1X
hold time
for
Network Access Server
Example:
To configure 802.1X
hold time
(12 seconds) for
Network Access Server
Switch# configure terminal
Switch (config)#
dot1x timeout quiet-period 12
dot1x timeout tx-period
Command:
dot1x timeout tx-period <1-65535>
tx-period
The time between EAPOL retransmissions.
Default:
30
NS3500-24T-4C Managed Switch Command Guide
43
