Chapter 4: Commands for CLI configuration
Default:
N/A
Usage Guide:
To restart 802.1X authentication process.
Example:
To restart 802.1X authentication process for
GigabitEthernet X/X
.
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
dot1x re-authenticate
duplex
Command:
duplex auto | full | half
duplex
Interface duplex
auto
Auto negotiation of duplex mode.
full
Forced full duplex.
half
Forced half duplex.
Default:
Auto
Usage Guide:
To configure
duplex
mode for interface.
Example:
To configure auto
duplex
mode for
GigabitEthernet X/X.
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
duplex auto
end
Command:
end
end
Go back to EXEC mode
Default:
Auto
Usage Guide:
To back to
EXEC mode
Example:
To back to
EXEC mode
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
end
Switch#
NS3500-24T-4C Managed Switch Command Guide
69
