Chapter 4: Commands for CLI configuration
Switch# configure terminal
Switch (config)#
mep 2 lm 5 uni flr 4
mep <Instance> lt
Command:
mep <Instance>
lt <prio> { { mep-id <mepid> } | { mac
<mac> } } ttl <ttl>
mep
Maintenance Entity Point
<Instance>
The MEP instance number.
lt
Link Trace
<Prio : 0-7>
Priority in case of tagged OAM. In the EVC domain this is the COS-
ID.
mac
Link Trace target unicast MAC to be used in case of LT against MIP.
<Mac : mac_addr>
Link Trace target unicast MAC value.
mep-id
Peer MEP-ID for Link Trace target unicast MAC. The MAC is taken from
peer MEP MAC database.
<Mepid : uint>
Peer MEP-ID value.
ttl
Time To Live.
<Ttl : uint>
Time To Live value
Default:
Usage Guide:
To configure
Link Trace
of
MEP
.
Example:
To configure
Link Trace
of
MEP 1
as below table
Switch# configure terminal
Switch (config)#
mep 1 lt 4 mac 11-3A-15-A3-53-44
mep <Instance> meg-id
Command:
mep <Instance>
meg-id <megid> { itu | itu-cc | { ieee [ name
<name> ] } }
mep
Maintenance Entity Point
<Instance>
The MEP instance number.
meg-id
The ITU/IEEE MEG-ID
<Megid : word>
The MEG-ID string. This is either the ITU MEG-ID or the IEEE
Short MA, depending on the selected MEG-ID format. The
ITU max. is 13 characters. The ITU-CC max. is 15
178
NS3500-24T-4C Managed Switch Command Guide
