Chapter 4: Commands for CLI configuration
Usage Guide:
To configure
Unknown Frames Storm Control Rate
of
QoS
for specific interface
Example:
To configure
Unknown Frames Storm Control Rate
(999 fps)
of
QoS
for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
qos storm unicast 999 fps
qos tag-remark
Command:
qos tag-remark pcp
<Pcp : 0-7>
dei <Dei : 0-1>
qos
Quality of Service
tag-remark
Tag remarking configuration
pcp
Specify default PCP
<Pcp : 0-7>
Specific PCP
dei
Specify default DEI
<Dei : 0-1>
Specific DEI
Default:
0
Usage Guide:
To enable
Tag-remark default mode
of
QoS
for specific interface
Example:
To enable
Tag-remark default mode
(PCP:1 , DEI:1)
of
QoS
for
GigabitEthernet
X/X
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
qos tag-remark pcp 1 dei 1
qos tag-remark mapped
Command:
qos tag-remark mapped
qos
Quality of Service
tag-remark
Tag remarking configuration
mapped
Used mapped values (cos,dpl -> pcp,dei)
Default:
Classified
Usage Guide:
To enable
Tag-remark mapped mode
of
QoS
for specific interface
NS3500-24T-4C Managed Switch Command Guide
101
