Interlogix NS3500-24T-4C, Command Manual

Page: 298 / 326

Chapter 4: Commands for CLI configuration
show platform phy failover
Command:
show platform phy failover
show Show running system information
platform Platform specific information
phy PHYs' information
failover Failover status
Default:
N/A
Usage Guide:
To display the PHY failover status.
Example:
To display the PHY failover status.
Switch # show platform phy failover
Port Active Channel Broadcast After reset
---- ------ ------- --------- ------------
show platform phy id
Command:
show platform phy id [ interface ( <port_type>
[ <port_type_list> ] ) ]
show Show running system information
platform Platform specific information
phy PHYs' information
id id
interface Search by port
Default:
N/A
Usage Guide:
To display the PHY ID.
Example:
To display the PHY ID for GigabitEthernet 1/1 .
Switch # show platform phy id interface GigabitEthernet 1/1
Port Channel API Base Phy Id Phy Rev.
---- ------- -------- ------- ------
1 0 0 (1g) 8634 0
show platform phy status
Command:
show platform phy status [ interface ( <port_type>
[ <v_port_type_list> ] ) ]
show Show running system information
296 NS3500-24T-4C Managed Switch Command Guide