Related Information
PFL II Parameters
on page 78
3.1.7.1.4. Verifying the Option Bit Start and End Addresses
You can decode the start and end address that you specified for each of the SOF page when converting a
.sof
to
.pof
file
from the 32-bit value of the sector offset address. If you encounter a configuration error you can verify that the generated
bitstream addresses match the addresses you specified in the Intel Quartus Prime Software.
The following table shows the bit fields of the start address.
Table 20.
Start Address Bit Content
Bit
Width
Description
31:11
21
Addressable start address
10:1
10
Reserved bits
0
1
Page valid bit
• 0=Valid
• 1=Error
Table 21.
End Address Bit Content
Bit
Width
Description
31:0
32
Addressable end address
To restore the addresses:
•
Start address—append 13'b0000000000000 to the addressable start address
•
End address—append 2'b11 to the addressable end address
For a
.pof
that has two page addresses with the values shown in the following table.
Sector Offset
Value
0x00
–
0x03
0x00004000
0x04
–
0x07
0x00196E30
0x08
–
0x0B
0x001C0000
3. Intel Agilex Configuration Schemes
683673 | 2021.10.29
Intel
®
Agilex
™
Configuration User Guide
72
