Note: You do not need to specify the flash device for
.rpd
files because the
.rpd
format is independent of the flash
device. In contrast, the
.pof
and
.jic
files include both programming data and additional data specific to the
configuration device. The Intel Quartus Prime Programmer uses this additional data to establish communication with
the configuration device and then write the programming data.
9. Click Generate to generate the programming file(s).
a. You can optionally Click File
➤
Save As .. to save the configuration parameters as a file with the
.pfg
extension.
The
.pfg
file contains your settings for the Programming File Generator. After you save the
.pfg
, you can use this
file to regenerate the programming file by running the following command:
quartus_pfg -c <configuration_file>.pfg
Related Information
Intel Quartus Prime Pro Edition User Guide: Programmer
For comprehensive information about programming file generation and conversion.
3.2.10.2. Programming .pof files into Serial Flash Device
To program the
.pof
into the serial flash device through the AS header, perform the following steps:
1. In the Programmer window, click Hardware Setup and select the desired download cable.
2. In the Mode list, select Active Serial Programming.
3. Click Auto Detect button on the left pane.
4. Select the device to be programmed and click Add File.
5. Select the
.pof
to be programmed to the selected device.
6. Click Start to start programming.
3. Intel Agilex Configuration Schemes
683673 | 2021.10.29
Intel
®
Agilex
™
Configuration User Guide
121
