Chapter 5: Subsystem Maintenance and Upgrading
back-end connectors are engaging the backplane. (See
the figure below)
Figure 5-3: Installing the Controller Module
Step 6.
When the controller is fully inserted, pull the lever upward
to secure the controller into chassis. (See the figure
below)
Figure 5-4: Using the Ejection Levers to Secure Controller
Step 7.
Secure the controller module to the chassis.
Fasten
the two (2) screws that secure the ejection levers.
Step 8.
Re-attach all cables
that were removed. These include
the Fibre Channel host links, Ethernet cable to the
management port, and serial cables to the COM ports.
5-5
