EonStor S12F-R1432/G1433 Installation and Hardware Reference Manual
Figure 2-27: BBU LED
NOTE:
1.
A new or replaced BBU takes at least 12 hours to charge to its
full capacity.
2. You may check the BBU-related event messages on the LCD
screen or your terminal console to make sure a BBU is
successfully installed and starts charging.
3.
The life expectancy of a BBU is more than one year. However,
batteries’ life span can fluctuate depending on how many times
batteries are charged. An installation date record is kept in the
EEPROM embedded in the battery module. When the BBU
reaches the one-year life expectancy, system firmware will
automatically notify the administrator. Follow the procedures in
Section 5.4.2
to replace a faulty BBU in order to maintain fault-
tolerant feature.
2-22
