EonStor S12F-R1432/G1433 Installation and Hardware Reference Manual
Figure 2-19: Screw Holes for Hard Drive Installation with MUX
2.8 Drive Tray Installation
Once the hard drives have been installed into the drive trays, the
drive trays are ready to be installed into the subsystem.
WARNING!
All drive trays must be installed into the enclosure even if they do
not contain hard drives. If any drive bays are left empty, the
ventilation required for cooling will not be normalized and the
subsystem will overheat.
Step 1.
Make sure the rotary bezel lock is in the unlocked
position
, i.e., the groove on its face is in a horizontal
orientation as shown in the figure below. If the groove is
in a vertical position
,
use a small size flatblade
screwdriver to turn it in a horizontal position.
Figure 2-20: Front View of a Drive Tray whose Bezel Lock in Unlocked
Position
Step 2.
Open the front flap on the drive tray
by pushing the
release button on the front flap (see
the figure below).
The front flap will automatically spring open.
2-18
