EonStor S12F-R1432/G1433 Installation and Hardware Reference Manual
6.
PSU LEDs:
If the PSU is operating normally and experiencing no
problem after being powered on, the LEDs on the PSU should
light green constantly.
7.
Firmware and SANWatch:
Once the subsystem has been
successfully initialized, you may examine details of the operating
statuses using the firmware-embedded utility or the SANWatch
GUI software suite.
8.
Audible alarm:
If any errors occur during the initialization
process, the onboard alarm will sound in a hastily repeated
manner.
NOTE:
The subsystem has been designed to run continuously. If one of the
redundant components fails, the fault can be corrected online.
4.1.4 LCD
Screen
When powering on the subsystem, wait for the front panel LCD
screen to show “
READY
” or “
No Host LUN
.”
Figure 4-3: The LCD Startup Screen on S12F-R1432
S12F-R1432
Model Name
Status/Data Transfer Indicator
P/S
Primary/Secondary Controller
Ready
Figure 4-4: The LCD Startup Screen on S12F-G1433
Model Name
S12F-G1433
Status/Data Transfer Indicator
Ready
The LCD screen startup sequence is shown and described in the
sequence below:
4-4
