EonStor S12F-R1432/G1433 Installation and Hardware Reference Manual
5.2.2.2
Replacing a Controller Module on S12F-
G1433
To replace the controller module:
Step 1.
Prepare a clean, static-free work pad or container
to
place the removed controller.
Step
2.
Disconnect all cables from the failed controller
module
. These may include the Ethernet cable, Fibre
Channel host links, and serial cables connected to the
COM ports.
Step 3.
Loosen the captive screws
that secure the controller to
the chassis. (See the figure below)
Figure 5-5: Loosening the Controller Captive Screws
Step 4.
Remove the failed controller
by simultaneously pulling
the captive screws on both sides. Place the controller
module on the clean, static-free work pad or container
previously prepared. (See the figure below)
Figure 5-6: Removing Controller
Step 5.
Install the replacement controller
. Align the controller
module with the module bay. Gently slide the controller
module in and use slightly more force to engage the
back-end connectors. (See the figure below)
Figure 5-7: Installing the Controller Module
5-6
